Dale601E

The DALE601E Electrical Safety Analyzer is the industry's lowest priced full function Electrical Safety Analyzer.

Unique to the DALE601E is its capability to make a broad range of external measurements. A clearly labeled single master function switch guides the user through a complete measurement procedure.

The DALE601E measures Line Voltage, Instrument Current, Ground Resistance, Earth and Chassis Leakage Current, Patient Lead-to-Ground, Lead-to-Lead and Lead Isolation (M.A.P.) Current, External Gradient, Probe and Transducer Isolation Current and Point-to-Point Resistance.

Heavy-duty switches change polarity, open and close the neutral and select Chassis or Earth Leakage Current measurements. A four-wire Kelvin bridge eliminates reading errors in resistance due to cable length and contact resistance. True RMS measurements are provided for all current readings. The AAMI test load is utilized.

The DALE601E has five (5) universal EKG lead connectors that allow for any type of lead connection.There is also a single slide switch that gives the user a choice of AAMI or IEC test load.

Small, lightweight, self-contained portable instrument
Master range meter delivers accurate measurment for each test
Accurate test measurements with 4-wire Kelvin bridge
Test method complies with AAMI load per ANSI/AAMI ES1-1993 or IEC601-1
Leakage Current can be measured in Open/Closed Neutral, Normal/Reversed Polarity and Open/Closed Ground
All Leakage Current measurements are displayed directly in µAmps
Broad range of external measurements
Five (5) Universal EKG Lead Connectors
The DALE601E is designed for 230 V operation

Specifications

Mains Voltage

230 Volts, 50/60 Hz

Instrument Current

Range:	0 - 10.00 Amps
Resolution:	10 mA
Accuracy:	5 % R

Ground (Earth) Resistance

Range: 0 - 1.99	Accuracy: 1% R ± 1 LSD
2 - 19.99	Accuracy: 2 % R ± 1 LSD
Resolution:	10 mOhms

Leakage Current

Range:	0 - 1, 999 µA
Accuracy:	DC & 25 Hz - 1kHz: ±1% of reading, ± 3LSD
	1.0KHz - 100 KHz: ±2.5% of reading, ± 3LSD
	100 KHz - 1 MHz: ±5% of reading, ± 3LSD
Type Measurement:	True RMS
Test Load:	AAMI or IEC601-1 (selectable)

Current Consumption

Range:	0-14.99A(Dale 601-1515)
	0-19.99A(Dale 601-1520/2020)
	0-9.99A(Dale 601E)

Current Capacity

Dale 601-1515	15Amps
Dale 601E	10Amps
Dale 601-1520/2020	20Amps, 20% duty cycle (2 minutes on, 8 minutes off)

Controls

	1. Function Switch - 9 position rotary
	2. Lead Switch - 6 position rotary
	3. Neutral Switch - 2 position rocker (Open/Closed)
	4. Polarity Switch - 3 position rocker (Normal/Off/Reversed)
	5. Leakage Switch - 2 position rocker (Chassis/Earth)

DUT Power

10 Amps @ 230 V

Physical Size

4.0 x 7.8 x 1.6 inches (102 x 196 x 41 mm)

แคตาล็อค Dale 601E

คู่มือการใช้งาน Dale 601E